Accessories
Many accessories available including Ball Valves, Drip Trays, Overflows and Covers.
We can supply a various range of accessories which is listed below, for more details on any of the accessories please contact us.
Range of Accessories
- Aylesbury Float Valves
- Ball Valves
- Screened Overflows Kits & Vents
- Access hatches (Raised/Hinged/Locked)
- GRP Ball Valve Housings
- Screened Spillover Wiers
- Type AB Airgaps (CAT 5 Backflow prevention)
- GRP Split / Flat Lids
- GRP Drip Trays
- UPVC Tank Connectors
- Brass BSP Essex Connectors
- NP16 Stub Flanges
|
|
|
Aylesbury Float Valve
All valves are approved by WRAS. Manufactured in either brass or stainless steel and incorporating ceramic discs and a puncture proof float, enables them to far outperform conventional ball float valves. The delayed action results in full on flow when demanded and positive shut-off when desired water level is reached.
Range of Aylesbury Float Valve
|
K Type Brass
The weighted key-shaped float can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer.
Valve sizes: �", �", 1", 1�", 1�"SF, 1�"HF & 2"SF |
|
K Type Stainless Steel
The weighted key-shaped float can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer.
Valve sizes: 3/4", 1", 1 1/4", 1 1/2" & 2" |
|
KX Type Brass
The weighted key-shaped float with a longer float arm can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer.
Valve sizes: �", 1", 1�" & 1�"SF |
|
KA Type Brass (KAX)
Identical in operation to the 'K' Type, the Aylesbury 'KA' Type Valve has an extended drop and is suitable for use in raised valve chambers.
Valve sizes: �", �", 1", 1�", 1�"SF, 1�"HF & 2"SF |
|
KB Type Brass
The versatility of the Aylesbury 'KB' Type makes it suitable for installation either direct into a tank or into a raised valve chamber. Offers almost infinitely variable opening and closing water level settings.
Valve sizes: �", 1", 1� ", 1�"SF, 1�"HF, 2"SF, 2"HF, 2�"SF & 3"RB |
Equilibrium Ball Valve
All valves are Wras approved. Manufactured in brass with a brass float, available with adjustable drop arms to enable the valve to be fitted in a raised ball valve housings with airgaps.
Range of Equilibrium Ball Valve
Solid Brass with Threaded tank connector, Brass float and Drop arm.
Valve sizes: �", �", 1", 1�", 1�", 1�", 2", 2�", 3", 4"
Screened Overflow Kits
Previously Bylaw 30 Fittings, Overflow kits comprise of a Screened Overflow fittings, Screened Warning Pipe and Screened Tank Vent. Overflow kits are recommended to be a minimum of twice the size of the inlet into the tank.
Range of Screened Overflow Kits.
Medium Duty Overflow Kit
Sizes: �", 1", 1�", 2".
Heavy Duty Overflow Kit
Sizes: 2�", 3", 4", 6", 8".
Access Hatches
Available in varying sizes and shapes, also know as Inspection Hatch and, Manway,
Range of Access Hatches.
Square GRP Hatches (Wingnut & Bolted)
Sizes: 450mm Hole (550mm overall), 600mm Hole (700mm Overall).
Height of Hatch : 100mm
Round Black Plastic Hatches (Collar screwed down, Hatch screws into collar)
Sizes: 400mm (450mm overall), 570mm (620mm overall)
Height of Hatch : 30mm
GRP Raised Ball Valve Housings
Bolted to the lid of the tank for increasing the capacity of the tank but also to provide Type AB Airgaps (when supplied with Screened Spillover Weir). Available in matching colour to the tank, With either lid with wingnuts or Side access with wingnuts. Can also be provided to be bolted onto most existing lids.
Range of Raised Ball Valve Housings.
Sizes: 750 * 400 * 200mm.
780 * 600 * 330mm.
1250 * 600 * 360mm.
Screened Spillover Weir
Designed to comply with the water authorities request to provide a catagory 5 Back flow Prevention system the Screened Spillover Weirs create a Type AB Airgap below the inlet and are cowled to prevent incress of light . Screened with 316 grade Stainless Steel Mesh and fixed into either the side of a ball valve housing or in the side of a tank to ensure the mains cannot become contaminated.
Range of Screened Spillover Wiers.
Sizes: 400 * 80mm.
800 * 80mm.
|